Mass Flux Density Converter
Mass flux density is the rate of mass flow per unit of cross-sectional area. The SI unit is the kilogram per second per square metre, kg/(s·m²).
1 Kilogram/Second-Meter² = 737.338117 Pound/Hour-Foot²
How to convert Kilogram/Second-Meter² to Pound/Hour-Foot²
One Kilogram/Second-Meter² equals 737.338117 Pound/Hour-Foot², so multiply any value in kg/(s·m²) by 737.338117 to get lb/(h·ft²). To convert back, divide by 737.338117 — or multiply by 0.001356229899.
lb/(h·ft²) = kg/(s·m²) × 737.338117
Example: 25 kg/(s·m²) × 737.338117 = 18,433.45293 lb/(h·ft²).
Kilogram/Second-Meter² to Pound/Hour-Foot² table
| Kilogram/Second-Meter² (kg/(s·m²)) | Pound/Hour-Foot² (lb/(h·ft²)) |
|---|---|
| 1 | 737.338117 |
| 2 | 1,474.676234 |
| 3 | 2,212.014351 |
| 4 | 2,949.352468 |
| 5 | 3,686.690585 |
| 10 | 7,373.38117 |
| 15 | 11,060.07176 |
| 20 | 14,746.76234 |
| 25 | 18,433.45293 |
| 50 | 36,866.90585 |
| 75 | 55,300.35878 |
| 100 | 73,733.8117 |
| 250 | 184,334.5293 |
| 500 | 368,669.0585 |
| 1,000 | 737,338.117 |
Pound/Hour-Foot² to Kilogram/Second-Meter² table
| Pound/Hour-Foot² (lb/(h·ft²)) | Kilogram/Second-Meter² (kg/(s·m²)) |
|---|---|
| 1 | 0.001356229899 |
| 2 | 0.002712459798 |
| 3 | 0.004068689697 |
| 4 | 0.005424919596 |
| 5 | 0.006781149495 |
| 10 | 0.01356229899 |
| 15 | 0.02034344848 |
| 20 | 0.02712459798 |
| 25 | 0.03390574747 |
| 50 | 0.06781149495 |
| 75 | 0.1017172424 |
| 100 | 0.1356229899 |
| 250 | 0.3390574747 |
| 500 | 0.6781149495 |
| 1,000 | 1.356229899 |
Mass Flux Density units at a glance
All 7 units this converter supports, each expressed in Kilogram/Second-Meter² (kg/(s·m²)) and the other way round.
| Unit | Symbol | 1 unit in kg/(s·m²) | 1 kg/(s·m²) in unit |
|---|---|---|---|
| Kilogram/Second-Meter² | kg/(s·m²) | 1 | 1 |
| Kilogram/Hour-Meter² | kg/(h·m²) | 0.0002777777778 | 3,600 |
| Kilogram/Second-Centimeter² | kg/(s·cm²) | 10,000 | 0.0001 |
| Gram/Second-Centimeter² | g/(s·cm²) | 10 | 0.1 |
| Pound/Hour-Foot² | lb/(h·ft²) | 0.001356229899 | 737.338117 |
| Pound/Second-Foot² | lb/(s·ft²) | 4.882427636 | 0.2048161436 |
| Gram/Second-Meter² | g/(s·m²) | 0.001 | 1,000 |
Where mass flux density conversions are used
Evaporation and drying rates, membrane filtration, and heat and mass transfer engineering.
Frequently asked questions
What is 1 Kilogram/Second-Meter² in Pound/Hour-Foot²?
1 Kilogram/Second-Meter² (kg/(s·m²)) is 737.338117 Pound/Hour-Foot² (lb/(h·ft²)).
What is 1 Pound/Hour-Foot² in Kilogram/Second-Meter²?
1 Pound/Hour-Foot² (lb/(h·ft²)) is 0.001356229899 Kilogram/Second-Meter² (kg/(s·m²)).
How do I convert Kilogram/Second-Meter² to Pound/Hour-Foot²?
Multiply the value in Kilogram/Second-Meter² by 737.338117. For example, 5 kg/(s·m²) × 737.338117 = 3,686.690585 lb/(h·ft²). To go the other way, divide by 737.338117.
How many units does the mass flux density converter support?
It converts between 7 units: Kilogram/Second-Meter², Kilogram/Hour-Meter², Kilogram/Second-Centimeter², Gram/Second-Centimeter², Pound/Hour-Foot², Pound/Second-Foot², Gram/Second-Meter².
More Fluid Mechanics converters
- Flow (Volume) ConverterVolumetric flow rate conversions
- Flow (Mass) ConverterMass flow rate conversions
- Flow (Molar) ConverterMolar flow rate conversions
- Concentration (Molar) ConverterMolar concentration conversions
- Concentration (Solution) ConverterSolution / mass concentration and mixture ratio conversions
- Viscosity (Dynamic) ConverterDynamic (absolute) viscosity conversions
- Viscosity (Kinematic) ConverterKinematic viscosity conversions
- Surface Tension ConverterSurface tension and surface energy conversions
- Permeability ConverterPermeability (porous media) conversions
Figures on this page are calculated with the same conversion factors as the converter above and shown to up to 10 significant figures. See our disclaimer before relying on a result in a professional or safety-critical context.